poultry hammer mill feed grinder,corn grinder machine

Description of hammer mill feed grinder

This hammer mill feed grinder machine can crush all kinds of soft materials into small pieces to feed hen, chicken, rabbit and other animals
This corn grinder machine can be used to crush all kinds of grains into small granule such as corn, wheat, maize, batley,straw,leave.grass and so on. The prodeuct can feed many kinds of animals like hen, rabbit, corn grinder machine is suitable for small and large sized companies.

The advantage of hammer mill feed grinder

To ensure security, the feed inlet of this hammer mill feed grinder machine adopts self-suction design to avoid serious damage to operators.

Features of hammer mill feed grinder

A.hammer mill feed grinder as Stable working performance, reasonable structure, easy operation.

B.Automatic feeding roller, feeding smoothly and high efficiency.

C.Grass conveyor roller is flexible, easy to change and install.

D.Various power source as your reference: motor, diesel and tractor.

E.corn grinder machine is used with feed pellet mill to make chicken feed pellet with corn poweder,want to know more about poultry feed hammer mill feed grinder? welcome to contact us.

animal feed crusher,cattle feed crusher machine

Description of animal feed crusher

1. The feed crusher can grind the Bio-mass like straw, stalk and corn,peanut plants for animal.
2. The animal feed crusher can grind straw, stalk peanut plant and grain to be powder less than 3-5mm, which is right size before pelletizing and briquette.
3. This animal feed crusher has simple construction, convenient operation, high efficiency and low power consumption.
4.Knife of the animal feed crusher is made of high quality rolled steel dorable.
Features of animal feed crusher
1. The crushing chamber of the animal feed crusher is of tear circle shape, effectively eliminating the circular flow in the grinding process and getting higher capacity;
2. The animal feed shredder bottom of grinding chamber is fitted with U-shape double grinding structure, further improving the capacity with evener particle size;
3. All of our rotors pass an accurate dynamic balancing test, resulting in low noise and smooth running.
4. Both coarse and fine grinding
5. New type S-shape coupling directly connecting driving results in big offset travel and effectively avoid the heat from the bearing;
6. Beater blade edge is vacuum-welded by special alloy steel, resulting in long service life;
7. The imported components are used for key parts, resulting in long service life and low maintenance cost;
8.cattle feed crusher machine is used with animal feed pellet mill to produce poultry feed pellets for poultry farms

animal feed hammer mill for home use,portable and movable

Features of feed hammer mill

1.feed hammer mill is Unique Feeding Design, the feeding inlet is made at the side of the device to make feeding easily.
2. The feed hammer mill for home use body is made of steel plate, the site in the crush room which connects to the materials all use the wearable and commutative parts and double wear plate.
3. The corn grinder motor and rotor are installed in the same heavy-duty base, using coupling direct drive, the rotor are checked by dynamic balance, and can work forward and reverse, the hammers are arranged symmetrically.
4. The second grinding designed for grinding chamber, the output can increase 15% even particle size.it is usually used with pellet mill to make pelleted feed
5. Two kinds of gap between beaters and screeners through changing position of beater are used for coarse and fine grinding
6. The smaller gap between beater and screeners can be used for grinding coarse and fine materials.
Introduction of feed hammer mill:

1. feed hammer mill for home use is widely used in various feed mills, oil plants, alcohol plants, citric acid plants, etc.
2. The grinding chamber is tear-circle shape, effectively eliminating the circular flow in the grinding process and getting higher capacity;
3. The animal feed pulverizing machine bottom of grinding chamber is equipped with U-shape double grinding structure, further improving the capacity with evener grinding fineness.
4. Rotor passed accurate dynamic balancing test, resulting in low equipment noise and smooth as well as stable running.
5. One machine for both coarse grinding and fine grinding is realized through adjusting the gap between hammer and screen.
6. New type S shape coupling directly connecting driving results in big offset travel and effectively avoid the heating of bearing.
7. feed hammer mill is used with feed pellet mill to make animal feed pellets

wood pellet mill of ring die type with quality guaranteed

introduction of wood pellet mill

Ring die wood pellet mill is specially designed for big industrial production of wood pellets. The raw materials which can be pressed into wood pellets are easy to obtain, like groundnut shell, wood sawdust, paddy straw, wheat straw, palm husk, rice husks, etc and many other agro and forestry wastes. The final pellets can be used for industrial boilers and large power plants as well as home heating.structure of wood pellet mill,the pellet mill mainly composed of Underbed, Gearbox, Spindle box, Feed hopper, Granulation chamber, Adjusting bolt, Discharge outlet, Roller, Die, Motor drive transmission, Start and Emergency Stop Button etc. According to the requirements about wood pellet making machine, our factory also provide supporting equipments of a production line of pelleting process, includes crushing, mixing, drying, pelleting, cooling, packaging.The wood pellet mill is essential one.

rice straw pellet mill can process wheat straw to make fuel pellets

straw pellet mill

Flat Die Straw Pellet Mill is an ideal pelletizing mill which is mainly used for small-scale wood pellets production for home heating. Flat die feed pellet mill also has wide application in animal bedding plant. The raw materials for making biomass pellets are easy to obtain, like wheat straw,rice straw, sunflower stalk, forestry wastes, wood chips, etc. the straw pellet mill is Driven by electric motor makes the pellet machine more energy-saving and environmental friendly. Based on the unique characteristics of easy operation, low consumption, competitive price and environmental friendly, Vicor Flat Die Straw Pellet Mill is a good investment

Flat die pellet mill and rind die pellet mill are two common pellet mills nowadays in the market. The flat die pellet making machine originates in China, and most suppliers dwell on supplying flat die pellet mills. The flat die pellet mill, easily operate with simple structure and small area occupation, which is more popular with farmers and small scale wood pellet plants and feed pellet plants.
application of straw pellet mill

1. Flat Die pellet making machine is suitable for processing biomass materials such as wheat straw, sunflower stalk, forestry wastes, wood chips and many other wastes into wood pellets for green fuel.

2. Flat Die Pellet Mill is good pelletizing machine for animal bedding. Wood pellets are highly absorbent animal bedding which helps to reduce your bedding consumption, cleaning time and quantity of disposal. They absorb up to 4 times their weight in moisture and ammonia to keep animal territory cleaner and fresher.

flat die poultry feed pellet mill with quenched plate die

poultry feed pellet mill

Most types of poultry feed pellet mill which is flat die type pellet equipment will have some type of mill or pulverizer to make the desired particle size for dry products, wet products, or disperse solids in a slurry. The size reduction occurs either by impact, or crushing. The capacity of the pulverizer or mill depends on the type of material, and the fineness desired. feed crusher and mills range in design features for different size reduction in the chemical, mineral, pharmaceutical and food industries.and it is used with feed pellet mill to crush raw materials

Pelletizing is the process of making waste materials into solid fuel. The objects are used for burning purposes. Biomass Pellet can be made from any type of Agro-Forestry waste:

features of poultry feed pellet mill

* Electric flat die poultry feed pellet machine is driven by electric motor which makes it more energy-saving and environmentally friendly.* The flat die pellet mill is made of wear-resistant material thus having a long service life
* The pelleting process is visible, so it is convenient to solve problems in time.
* Ready-to-get raw materials like paddy straw, sunflower stalk, forestry wastes, wood chips, and many other agro and forestry wastes.
* the feed pellet making machine can be Able to change new die and rollers fast and conveniently.

do you want a tractor operated chaff cutter for cutting corn stalk?

Introduction of chaff cutter

tractor operated chaff cutter is widely used for cutting cotton stalk, bark, corn stalk, wheat straw, rice straw and etc biomass raw materials. Materials after cutting can be used for livestock feed producing, papermaking, artificial board and etc.we also have pellet mill for making pelleted feed for animals.Stalk cutting machine can be matched with electric motor, diesel engine and 30-50HP tractor. The whole chaff cutter machine is consist of feeding mechanism, cutting mechanism, tossing mechanism, transmission mechanism, running gear, protective device and frame. Reasonably structure, move convenient, automatic feeding, safe and reliable.

Application of chaff cutter

tractor operated chaff cutter is used for cutting green or dry corn stalks, rice straw and other forage crops, straw and agricultural animal husbandry machinery. Fed mainly by the general body, guillotine shear machine,throwing bodies, transmission, running gear, protection devices and rack components. 

tractor operated chaff Cutter Key features

Three-leaf knife of this type chaff cutter machine plates are equipped with strengthening ring, making it stronger and integral. Adjusting bolts are added between the knife plate and main axil, allowing more convenient movements and more convenient knife gap adjustments. 
the tractor chaff cutter has Advanced feeding structure with hay-conveying rollers (for whose patent we have been awarded), the animal feed cutter conveys hay automatically and smoothly at a high speed. tractor operated chaff cutter is Designed with motive knife safety guide, preventing knives from knocking into each other, thus making the whole machine safe and reliable. 

animal forage chopper,poultry farm feed chopper

Description of forage chopper

Chaff cutter can crush all types of dry feed, such as maize, sorghum, grain valley, rice straw, wheat straw, sweet potato vines and corn, peanut vines and pole beans and so on, the local Chinese herbal medicines can be crushed, quartz, coal and coal dry stone, small wood branches, etc. pharmaceutical raw materials and raw materials industries to pay workers.

Key features of forage chopper

1.Three-leaf knife of the chaff cutter plates are equipped with strengthening ring, making it stronger and integral. Adjusting bolts are added between the knife plate and main axel, allowing more convenient movements and more convenient knife gap adjustments.
2.this poultry farm feed chopper machine has Advanced feeding structure with hay-conveying rollers (for whose patent we have been awarded), the cutter conveys hay automatically and smoothly at a high speed.except animal forage chopper,we also have pellet mill making pellet feed for animal
3.the forage chopper is Designed with motive knife safety guide, preventing knives from knocking into each other, thus making the whole machine safe and reliable.
4.Unique gear boxes allow more accurate adjustment of processed hay length. The box is tightly sealed.
5.The straw chopping machine transmitting section is equipped with rolling bearings and universal joints, so it is easy to take apart and the whole machine operates smoothly.
6.The advanced feeding and transmitting structure is controlled by a button, which is easy to control.

cattle feed machine,stalk/straw chaff cutter machine

introduction of chaff cutter

straw chaff cutter machine is an art to compute a ration for milk producing animal depending upon the locally available resources. A qualified and experience veterinarian can guide you in formulation of suitable ration.
Animals once adapted to particular feed takes some time (10 –15 days) to switch over to other type of feed.Animals are the creatures of habit, whatever habit you create (e.g. giving concentrate at the time of Milking or concentrate soaked in water overnight) they will adapt to it. Find the best suitable method that is acceptable to your animals.
Details of chaff cutter

1. the straw chopping machine is used to crush all kinds of straw, with good quality and high capacity.
2.the chaff cutter machine used for cutting dry corn stalk ,grass, peanut stalk and so on, suitable for cow or sheep eating
3. the chaff cutter machine is application of new structural design, so that further reduce power consumption(with their peers comparedto the same types of products), cutting, feeding and reliable, sturdy and durable, long life and other advantages Cutter.

poultry feed pelletizer mill,home use pelletizer mill with small capacity

Flat die poultry feed pelletizer mill is mainly suitable for produce feed pellet or fuel pellet for households and small farms for farming, rabbit warren use.

Process flow for poultry feed pelletizer

1. crushing (control the size of material in 5~50mm) with feed hammer mill
2.Forming ( put the material into this machine,get the product)

Product Use for feed pelletizer:

1.the raw materials for this pellet mill are kinds of biomass, so it is a new feed in the farm or rabbit warren.
2.these pellet's calorific value in 3500-5500 kilocalorie, the density is 0.9-1.4g/cm3, small volume and high heat.

Features of feed pelletizer 

1. Raw material for feed pelletizer machine: corn flour, wheat flour, soybean powder, other feed material. The feed pelletizer also press the feed by adding some light substance such as straw, crude fiber, peanut shell , hay, grass and ect.
2. Feed Pelletizer for poultry can make feed for poultry, dog, rabbit, horse, and other animal feeding stuff processing.
3. this pellet mill is designed for households and small farms in rural farming, rabbit warren. It can process meal, straw particles and organic fertilizer, inorganic fertilizer into granules.

ISO9001 animal feed grinding mill,poultry feed grinder

1. feed grinding mill Introduction

9FZ series feed grinder mixer are our company’s new products which can guarantee the finished product standard, and overcome the inconvenience of the uneven fineness. The internal finish is the standard stainless steel mesh, sieve mesh number can be made and chosen according to your requirement .The animal feed grinding device has small size, easy packing, simple operation and no dust pollution, which are the best machines for the choice of milling flour equipments.There is one host machine on the engine base.And the feed grinding mill includes machine body and valves which makes up the feed crushing room. There are bearings and main shafts inside the machine. And the main working parts are the rotors and teeth.

2.feed ginding mill Adaptability

Fruit Shell, herbs, bark, leaves, wheat bran, rice husk, corn cob, straw, grains, dried small shrimps, fish meal, seaweed

3.The advantage of feed grinding mill:

1)This electric corn grinder machine is suitable for grinding corn, beans, grains and wheat and other grain materials ,can also be used for cutting
2)grinding sweet potato,potato and other lumps and dry sweet potato straw and other crude fiber .
3)grain crusher machine is an ideal feed processing equipment in farms,and an good helper for people to gain wealth.
4)used with feed pellet mill for making pellets, to crush raw materials.

2 in 1 animal feed crusher and mixer,vertical feed crusher

Usage of feed crusher and mixer
This feed crusher and mixer can be used to crush all kinds of cereal, grain, like corn, wheat, bean, and others to powder that can make animal feed or for other process, the feed mixer has the crush and mix function at the same time, very convenient and easy to operate.The feed crusher and mixer machine consists of a feeding machine, grinder, mixer.
Application of feed crusher and mixer
This verticalcattle/cow feed grinder and mixer machine is specially designed for small farmers, medium and industrial feed processing plant, chicken farm, pig farm, feeding industry,or home use The structure has the advantages of brief construction, little investment, economical, maintenance easy and mixes extremely well.animal feed crusher mixer machine can be used together with the feed pellet mill to complete a whole pellet production line.

floating fish feed pellet mill for fish farm making fish feed

Floating Fish Feed pellet mmill Introduction

Floating fish feed machine is widely used for producing grains into high-grade aquatic feed pellets for fish, catfish, shrimps, crab etc. The puffing fish feed pellets can float on the water surface without dissolution for over 12 hours. According to your requirement and production scale, floating fish feed pellet mill can be classified into dry type machine and wet type machine.

Floating Fish Feed pellet mill Working process

After the material is sent into feeding device of fish feed pellet mill, they will be pressed by the screw shaft with high pressure and temperature which makes the raw material fully cooked and sterilized. Then the pressed material will be formed into pellets by shaping mould. You can change different moulds to make pellets with different diameters. After that a cutting device will cut the formed pellets into different length as required.

Advantages of the floating fish feed pellet machine:

1. Floating fish feed making machine adopting international advanced technology, the pellets are very even.
2. We can adjust the cutter to get the different pellet diameter and the length
3. The electric heating device improve the feed expansion rate.
4. High temperature and high pressure can kill the salmonellosis and

corn grinder for crushing corn, wheat,rice,soybean into powder form

Working principle of corn grinder

Using the high speed rotation of the tooth claw to smash material

Main Advantage of corn grinder

3.1 this feed shredder has Compact structure, small occupied area.
3.2 Easy to disinfectand convenient to change variety.Our machine is consistent with the GMP standard.
3.3 Smoothy operation,no noise, small vibration andgood environmental quality
3.4 Smoothy surface,easy to clean.
3.5 Simple to use,replace screen can control the size of particle size.
3.6 the feed corn grinder is used with feed pellet mill to make animal feed pellets.

ring die type animal feed pellet mill supplied for poultry farm

Features of animal feed pellet mill

1. Gear directly-connecting driving is adopted for high efficiency;
2. Full stainless steel feeder; Variable pitch and anti-bridging structure; Electromagnetic converter control;
3. Stainless steel conditioner; axial steam spraying extends the conditioning time and cooking effect;
4. Main gear and pinion shaft adopt the carbonizing quenching with high accuracy; smooth driving, low noise and long service life;

FAQS about animal feed pellet mill

1. Q: Are you a trading company or a manufacturer?
A: We are a manufacturer, which has almost 20 years of experience in this industry.
2. Q: before pelleting, the raw materials have to be crusher?
A: yes, any kind of raw materials before pelleting, we have to use a feed hammer mill crusher to crush them into 3--5mm.
3. Q: How long is your guarantee?
A: One Year (Calculated from the equipment arrives the customer’s side.). After this period we will definitely still support you when needed. You will be welcome to contact us with any problem might experience

animal feed pelletizer machine for chicken feed,sheep feed,

High quality of feed pelletizer machine The Pellet Machine is top selected for high-class feed factories. 90% of Chinese top thirty biggest feed enterprises use our Pellet Machine .High stability of feed pelletizer machine we have More than 4000 sets of feed pelletizer are running stably for a long term in over 60 countries all over the world. our feed pelletizer machine ranked the first in worldwide market share.
Double-motor of feed pelletizer machine Double-motor synchronous gearing-shape belt step-by-step driving system is adopted by the machine, which is characterized by ideal drive ratio and large driving moment,smooth rotation, high output, low noise, and easy operation and maintenance.

Packaging Detail:

For Feed Pellet Machine: Bracket, tray and fully sheathed case act as the main packaging containers for storage equipments,shipped in 20ft or 40ft containers. Bracket and pallet are as the packaging container for side panels, reinforcing rib and vane. Goods like trestle stand, roof are packed with simple steel power (similar to bundle packaging), directly shippable. Construction materials such as bolts, welding rod are containerized with closed wooden box.

wood pellet mill for processing wood chips,sawdust,biomass for fuel

wood pellet mill specification :

1. This wood pellet mill is mainly used for making wood pellets ,the finalpellets used for industry, boiler factories , the machine can be produceφ6.0,φ8.0,φ10.0,φ12.0 pellets. 
2. The wood pellet mill is adopted imported SKF or NSK bearings, the motor brand
is Siemens or china famous national standard .
3. the pellet mill is Driven by gear .more strong than by belt, and the capacity 10% higher than by belt .
4. the wood pellet mill is also matched the safty equipment , once overload , the safty pin will crack, to protecting the wood processing machine lifetime .

Product Features of wood pellet mill
1. High efficient one step gear driving ensures maximum utilization ratio of energy.
2. Full stainless steel feeder; Variable-pitch anti-arch structure; Imported frequency converter control.
3. LL stainless steel conditioner extends the conditioning and cooking time. Axial steam spraying port, improving feed cooking efficiency.
4. the pellet making machine has High precision of driving main gear and pinion shaft adopt the carbonizing quenching and hard tooth surface grinding technology, resulting in smooth driving, low noise and long service life.
5. Bearing and oil seals of main driving system are well-know high quality bearing and oil seal such s SKF and etc...And a lubrication oil-return system is especially available to reliable lubrication of bearings

water drop hammer mill for making poultry forage

We are specialized in designing and manufacturing poultry feed,aquatic feed pellet mill,biomass pellet machine and the complete production line(all auxiliary equipment)
The current products include: water drop hammer mill for feed, ingredient weighing system, mixer, pellet mill, counter-flow cooler, dryer, crumbler, rotary screener, liquid adding equipment, pulse filter equipment, horizontal and vertical conveying equipment, links and gates, permanent magnet cylinder, and de-iron equipment etc.

features and structures

1. the feed grinder crushing room at the bottom of the use of two-hit designed to increase production by more than 15%,to crush a more uniform size
2. room for the water drop hammer mill,to elimination of circulation and increase output
3. through the adjustment of screener space,to achieve coarse or fine crush,so live up to a dual-purpose machine
4. mill rotor balancing by check,equipment operation less vibration,less noise,more stable
5. vacuum melting and hardening the surface of hammer pin,plate with high-quality carbon structural steel manufacturing,to extend the service life,reduce the consumption of parts
6. direct drive,a new snake-coupling spring,compensation,to avoid bearing have a fever

9FQ series feed hammer mill machine to make livestock feed

1.Introduction

9FQ series feed hammer mill crusher is made of all-steel structure, which will not be destroyed by iron, stone, shell debris strayed into the machine off the hook, and one with the power assembly to facilitate flow of processing. The machine is used in food, crop dry and straw smashing processing can also be used for potato beatin

2.Features:
The raw materials can be crushed into straw particles, The durable straw hammer mill works with high efficiency and gains more good reputation from European users.The machine could be driven by the diesel engine, motor, tractor, etc. 
The kinds of machine could be matched with mounting plate for motor or diesel engine, and collector.
before we pellet by a feed pellet mill to make feed pellets, we also have to use such a feed hammer mill to crush raw materials.

animal feed hammer mill crusher for poultry farm feed

Introduction of hammer mill

1.9FQ series feed hammer mill with cyclone is the most ideal milling equipment of all kinds of wood pieces, straw, grass, stalk, tree branches, waste cardboard, bamboo, wood scrap,corn stalk, peanut shell, wheat stalk, wood fuel, cotton stalk, biomass shell and so on.
2.this feed hammer mill is one kind of small crush machine, the knife can cut and crush the raw material with 1mm diameter.As for the wood chips, stick, straw and stalk into pieces can be as required.it is usually used together with feed pellet mill for feed industry to make animal feed,because the raw materials have to be crushed into powder form.
3.this feed grinding mill is suitable for grinding the grains, such corn, wheat, straw, etc. If for wood and paring, use different hammer.

feed hammer mill featuers
1. The grinding chamber is tear-circle shape, effectively eliminating the circular flow in the grinding process and getting higher capacity;
2. The bottom is fitted with U-shape double grinding chamber structure, further improving the capacity with evener grinding fineness;
3. Rotor passes accurate dynamic balancing test, resulting in low noise and running smoothly;
4. New-type coupling directly-connecting driving results in big offset travel and effectively avoid heating of  the bearing;
5. The high quality bearing is imported from Japan, resulting in long service life and low maintenance cost;
6. The moving full-wide operation door facilitates maintenance and replacing of hammer;

diesel chaff cutter features and specification

chaff cutter features1.this diesel chaff cutter has Entire steel structure, small & light

2.Special device to ensure the safety on operating
3.The grass roller adopts cross shaft, has the advantage of compact structure, running agility, simple installing
4.Multi-choice on power, motor, diesel engine and tractor are ok. It especial suit for the electric scarce area
5.The blade adopts high quality steel, through special technology processing, it is Super Wear-Resistant and fixed by high strength bolt to ensure the safety when running

Working principle

Chaff cutter for animal feed by motor as a supporting power. make power transfer to the spindle, the other end of the main shaft gear through the gear box, universal joint, etc the diesel chaff cutter will pass the speed to transfer the power of the pressure, and when to grass materials and processing in pressure between  grass pressure was holding and certain grass roller speed into cut institutions, the high speed rotating tool cut up by the grass turned out the mouth.

Type	Capacity(t/h)	Power(kw)	Overall Dimension (L*W*H) (mm)	Weight(t)
9Z-12.0C	12	18.5	2950x2160x1900	1.35
9Z-10.0C	10	15	2750x2050x1800	1.05
93Z-8.0C	8	11	1970x950x1800m	0.63
9Z-5.0C	5	7.5	1400x930x1720m	0.55
9Z-3.0C	3	5.5	1240x770x1600m	0.32
9Z-2.0C	2	4	1130x670x1400m	0.2
9Z-1.5C	1.5	3	1050x600x1250m	0.16
9Z-0.4	0.4	2.2	850x500x1000m	0.10

straw chopper machine for chopping stalk,straw

straw chopper introduction:

our straw chopper machine can be used for cutting all kinds of grass such as the clover corn stalk, wheat stalk, paddy stalk, broom corn stalk, etc. the straw cutter is popular with the light weight, high efficiency and low electricity.

straw chopper Features:

1. Grass roller shaft coupling is universal coupling, compact structure, flexible operation, convenient disassembly.
2. Diverse choice of motive power. Electric motors, diesel engines, tractors can be complementary; so the straw chopping machine can be used in the region lacking of electricity
3. Using high-quality steel blade, made with a special refining process, its super wear-resistant; using of high strength bolts, it is more safe and reliable.

4. Our ensiling chaff cutter have the features of high capacity and low noise.

Ⅰ.Delivery time: 3days after receive clients’ payment.

Ⅱ.Payment term: 300% as down payment by T/T, 70% by seeing the faxed B/L by T/T.

III. Valid time : This quotation is valid for one month.

chaff cutter to cut stalk for animal feed

brief introduction of chaff cutter
 chaff cutter can also process cotton stalk,branches, bark, and so on, used for straw generation ethanol, papermaking and artificial board etc.

features of Agricultural Chaff Cutter

1 this chaff cutter Adopts steel frame, small volume, light weight, convenient to move.
2 Insurance device adopts design, prevent accidents, machine gnawing dao is safe and reliable.the chaff cutter can be used with pellet mill to make pellet feed
3 Transmission roller adopts grass choose gimbal couplings, compact structure, convenient operation, flexible disassembling.
4 Responding to various choices, motor power diesel, tractor, can form a complete set, especially for power is more appropriate for lack of areas.
5 the feed chaff cutter Adopts high-quality steel blade, refined by a special process, super wear-resistant, Using high strength bolt, the use of safe and reliable.
6 Adopts thick plate machine chooses continuous welded, the whole die forming, suppress labels, beautiful and durable.

top pellet making mahine manufacturer from china

Raw material for Wood Pellet Making Machine
1.Wood waste, scobs, branch, palm tree, weeds are suitable for wood pellet making machine
2.Bean straw, wheat straw, corn straw, cotton straw, rice straw,rice husk, maize straw, corncob, cotton seed hull, cotton stalk;
3.Cotton shell, peanut shell, rice shell, palm tree, coconut shell, sunflower seed shell, etc. all kinds of agricultural straws, house refuse, waste plastic and wastes in factory. It is also suitable for raw materials which are difficult to form with low bonding ratio;
4.Furthermore, organic bacterial manure, organic fertilizer and compound fertilizer are applicable to pelletize under low temperature.

Application:

the wood pellet press machine is mainly used to compress crushed wood sawdust, wood chips, straw, grass, corn, rice husk, seed skin, peanuts shell clover, cotton seed Husk, biomass powder, plant waste, forest waste, chemical waste etc into little cylindrical shape pellets.You can use the pressed pellets to fuel or feed animals

feed pulverizer machine used with feed pellet mill

pellet mill Introduction:

a,animal pellet mill main market is Russia,Yemen, Oman,Malaysia,Bangladesh,etc, 
we have agents in Russia and Oman.also we have agetns in these above countries market. And the material thickness of main equipment is 2mm more thicker than the standard feed pellet mill in this businces scope. 

Application:

the flat die pellet mill is mainly used to press and turn crushed wood sawdust, wood chips, straw, grass, corn, rice husk, seed skin, peanuts shell clover, cotton seed Husk, biomass powder, plant waste, forest waste, animal manure waste etc into little cylindrical shape pellets.You can use the pressed pellets to fuel or feed animals.

feed pulverizer machine introduction

China authority proves and lots of customers witness on the scene,Fine-feed pulverizer machine has made revolutionary breakthroughs in performance.
Φ1.0mm, measured capacity up to 15.23 t/h, ton power consumption low to 11.2 kW*h/t
Φ1.5mm, measured capacity up to 16.80 t/h(Maximum up to 18.93 t/h), ton power consumption low to10.2 kW*h/t

Tequ: crushing corn, moisture 11.2%

china supplier of animal feed pellet mill

animal feed pellet mill has two types one is flat die pellet mill the other is ring die pellet mill,the raw materials for feed pellet mill has to be crushed into powder form with an electric feed grinder.

The requirements of the raw material

IF your raw material is straw,wooddust,bamboo powder,cotton wood, peanuts shell,clover, and so on. you can make the pellets as fuel with a wood pellet mill .If your raw material is corn, soybean peanut Sheller,corn stalk and other biomass materials, ou can make the pellets to feed the animals.But the diameter of raw material should be smaller than 3-5mm, if not, you will need a crusher machine.And the moisture 
should be 15-20%, if not, you will need a dryer machine or add water

whole processing for making pellets

1.crush the raw material into powder or 3-5mm
2.dry the raw material moisture content less than 12%
3.pelletizing the raw material to get the final pellets.
4.use cooler to cool and screen the final pellets, which can get the pure pellets and
easy to pack.